Core drill with tungsten-carbide and Quick IN-shank
Cutting depth 50 mm – Core drills with tungsten carbide cutters.
Particularly for rail tracks, Hardox / Weldox 400 steel, steel, cast iron, high-alloyed chromium steel such as stainless and acidresistant steel.
Considerably improved cutting behaviour was attained by research into the cutting geometry, which has a beneficial effect on cutting performance and drill life.
For use in magnetic-stand and column drilling machines in connection with Quick IN-adapter as the Fein KBM 32 Q.
Ø 12,0 mm up to Ø 32,0 mm with fixed shank.
Ø 33,0 mm up to Ø 80,0 mm including Quick IN-adapter No. 108 111.
Tekniske data:
| Kode | R1081112 |
|---|---|
| EAN-kode | 4007140091222 |
| Artikkel nr. | 1081112 |
| Diameter | 12,0 mm |
| Core drill | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. |
| Twist drills | Twist drills have to machine the entire diameter of the hole. This calls for considerable downward pressure and high driving power. |
| Weight | 0,084 kg |
| Cutting edges | Tungsten carbide |
| Adapter | Quick IN-shank 18 mm |
| Machine | With Quick IN-adapter |
| Cutting direction | Right-hand cutting |
| Cutting depth | 50,0 mm |
"(Påkrevd)" obligatorisk felt
| Produkt | Diameter | Core drill | Weight | Cutting edges | Adapter | Machine | Cutting direction | Cutting depth | Lager | Pris | Kjøp |
|---|---|---|---|---|---|---|---|---|---|---|---|
| R1081112 | 12,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,084 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081113 | 13,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,086 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081114 | 14,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,090 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081115 | 15,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,092 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081116 | 16,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,094 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081117 | 17,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,097 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081118 | 18,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,118 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081119 | 19,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,110 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081120 | 20,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,118 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081121 | 21,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,120 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081122 | 22,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,122 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081123 | 23,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,124 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081124 | 24,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,124 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081125 | 25,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,126 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081126 | 26,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,126 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081127 | 27,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,131 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081128 | 28,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,135 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081129 | 29,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,135 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081130 | 30,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,145 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081131 | 31,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,145 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081132 | 32,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,150 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081133 | 33,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,255 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081134 | 34,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,260 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081135 | 35,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,265 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081136 | 36,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,270 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081137 | 37,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,300 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081138 | 38,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,305 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081139 | 39,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,310 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081140 | 40,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,310 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081141 | 41,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,325 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081142 | 42,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,325 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081143 | 43,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,330 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081144 | 44,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,385 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081145 | 45,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,385 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081146 | 46,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,390 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081147 | 47,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,395 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081148 | 48,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,405 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081149 | 49,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,410 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081150 | 50,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,420 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081151 | 51,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,425 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081152 | 52,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,430 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | 0 | Logg inn for å se priser | |
| R1081153 | 53,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,440 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081154 | 54,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,445 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081155 | 55,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,455 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081160 | 60,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,465 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081161 | 61,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,470 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081163 | 63,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,475 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081165 | 65,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,480 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081168 | 68,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,490 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081170 | 70,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,505 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081171 | 71,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,505 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081175 | 75,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,570 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser | ||
| R1081180 | 80,0 mm | Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. | 0,615 kg | Tungsten carbide | Quick IN-shank 18 mm | With Quick IN-adapter | Right-hand cutting | 50,0 mm | Logg inn for å se priser |
