Hand taps MF DIN 2181 HSS
Set: 2-piece metric fine DIN ISO 13
For through threads and bottoming threads in unalloyed or low-alloyed steels up to 800 N/mm² strength, malleable cast iron and non-ferrous metals. The thread is cut in two operations. Also available individually.
Taper tap : article no. -1.
Final tap: article no. -2.
Taper tap: 5 – 6 thread chamfer
Final tap: 2 – 3 thread chamfer
Tekniske data:
Kode | R235101 |
---|---|
EAN-kode | |
Artikkel nr. | |
Nominal thread size | MF10 |
Pitch | 1,25 mm |
Thread core hole Ø1 | 8,7 mm |
Total length L1 | 70,0 mm |
Thread length L2 | 24,0 mm |
Thread angle | 60° |
Packing unit | 1 pcs |
"(Påkrevd)" obligatorisk felt
Produkt | Nominal thread size | Pitch | Thread core hole Ø1 | Total length L1 | Thread length L2 | Thread angle | Packing unit | Lager | Pris | Kjøp |
---|---|---|---|---|---|---|---|---|---|---|
R235030 | MF3 | 0,35 mm | 2,6 mm | 40,0 mm | 10,0 mm | 60° | 1 pcs | 0 | Logg inn for å se priser | |
R235050 | MF5 | 0,50 mm | 4,5 mm | 50,0 mm | 13,0 mm | 60° | 1 pcs | 0 | Logg inn for å se priser | |
R235100 | MF10 | 1,00 mm | 9,0 mm | 63,0 mm | 18,0 mm | 60° | 1 pcs | 0 | Logg inn for å se priser | |
R235101 | MF10 | 1,25 mm | 8,7 mm | 70,0 mm | 24,0 mm | 60° | 1 pcs | 0 | Logg inn for å se priser | |
R235140 | MF14 | 1,25 mm | 12,7 mm | 70,0 mm | 22,0 mm | 60° | 1 pcs | 0 | Logg inn for å se priser | |
R235180 | MF18 | 1,50 mm | 16,5 mm | 80,0 mm | 22,0 mm | 60° | 1 pcs | 0 | Logg inn for å se priser | |
R235200 | MF20 | 1,50 mm | 18,5 mm | 80,0 mm | 22,0 mm | 60° | 1 pcs | 0 | Logg inn for å se priser | |
R235240 | MF24 | 1,50 mm | 22,5 mm | 90,0 mm | 22,0 mm | 60° | 1 pcs | 0 | Logg inn for å se priser |