Machine tap M DIN 371 HSS-TiN M 2,5
metric DIN ISO 13 – Machine taps with reinforced shank and 35° right-hand spiral flutes for bottoming. The machine tap consists of heavy-duty high-speed steel with a titanium nitride coating. For universal use on a wide range of materials due to layer of hard material! For bottoming threads in unalloyed and alloyed steels up to a strength of 1000 N/mm², stainless steel. The thread is cut in one operation. Note: cutting speeds from 10 m/min. By the TiN wear-resistant coating, the surface hardness increases to about 2500 HV. Titanium nitride is a chemical compound of the two elements, titanium and nitrogen. TiN is a metallic hard material with a typical golden yellow colour. Advantages:
Increased hardness, low friction coefficient, more service life. Cooling is not necessary, but recommended.
Tekniske data:
| Kode | 106 003 009 000 |
|---|---|
| EAN-kode | 4007140285485 |
| Artikkel nr. | 234020T |
| Nominal thread size | M 2,5 |
| Packing unit | 1 pcs |
| Weight | 0,004 kg |
| Chamfer | Type C / 35° RSP, ca. 2 - 3 threads |
| Thread | Metric DIN ISO 13 |
| Flanks | Relief ground |
| Tolerance | ISO 2 / 6H |
| Surface | TiN coated |
| Cutting direction | Right hand cutting |
| Thread angle | 60 ° |
"(Påkrevd)" obligatorisk felt
| Produkt | Nominal thread size | Packing unit | Weight | Chamfer | Thread | Flanks | Tolerance | Surface | Cutting direction | Thread angle | Lager | Pris | Kjøp |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 106 003 009 000 | M 2,5 | 1 pcs | 0,004 kg | Type C / 35° RSP, ca. 2 - 3 threads | Metric DIN ISO 13 | Relief ground | ISO 2 / 6H | TiN coated | Right hand cutting | 60 ° | Logg inn for å se priser | ||
| R234025T | M 2,5 | 1 pcs | 0,004 kg | Type C / 35° RSP, ca. 2 - 3 threads | Metric DIN ISO 13 | Relief ground | ISO 2 / 6H | TiN coated | Right hand cutting | 60 ° | Logg inn for å se priser | ||
| R234030T | M 3 | 1 pcs | 0,006 kg | Type C / 35° RSP, ca. 2 - 3 threads | Metric DIN ISO 13 | Relief ground | ISO 2 / 6H | TiN coated | Right hand cutting | 60 ° | Logg inn for å se priser | ||
| R234040T | M 4 | 1 pcs | 0,008 kg | Type C / 35° RSP, ca. 2 - 3 threads | Metric DIN ISO 13 | Relief ground | ISO 2 / 6H | TiN coated | Right hand cutting | 60 ° | Logg inn for å se priser | ||
| R234050T | M 5 | 1 pcs | 0,014 kg | Type C / 35° RSP, ca. 2 - 3 threads | Metric DIN ISO 13 | Relief ground | ISO 2 / 6H | TiN coated | Right hand cutting | 60 ° | Logg inn for å se priser | ||
| R234060T | M 6 | 1 pcs | 0,015 kg | Type C / 35° RSP, ca. 2 - 3 threads | Metric DIN ISO 13 | Relief ground | ISO 2 / 6H | TiN coated | Right hand cutting | 60 ° | Logg inn for å se priser | ||
| R234080T | M 8 | 1 pcs | 0,028 kg | Type C / 35° RSP, ca. 2 - 3 threads | Metric DIN ISO 13 | Relief ground | ISO 2 / 6H | TiN coated | Right hand cutting | 60 ° | Logg inn for å se priser | ||
| R234100T | M 10 | 1 pcs | 0,051 kg | Type C / 35° RSP, ca. 2 - 3 threads | Metric DIN ISO 13 | Relief ground | ISO 2 / 6H | TiN coated | Right hand cutting | 60 ° | Logg inn for å se priser |
